Expand description
Absolute attribute slots for the parameterized profile families.
Lives here, not beside the lowerer, because lower is behind the
lowering feature while authoring is kernel-free: a writer that
imported these from lower would not compile with the feature off.
One definition, both directions.
Every index below was read from the IFC4 ADD2 TC1 schema, not inferred:
IfcParameterizedProfileDef contributes ProfileType, ProfileName and
Position, so subtype attributes start at slot 3.
Public because it is the schema itself, not an implementation detail:
a caller assembling a profile record by hand needs the same indices.
The kernel-free reader (input::profile) and the writers both index
through these constants.
Constantsยง
- AI_
BOTTOM_ EDGE IfcAsymmetricIShapeProfileDef.BottomFlangeEdgeRadius.- AI_
BOTTOM_ FILLET IfcAsymmetricIShapeProfileDef.BottomFlangeFilletRadius.- AI_
BOTTOM_ FLANGE IfcAsymmetricIShapeProfileDef.BottomFlangeThickness.- AI_
BOTTOM_ SLOPE IfcAsymmetricIShapeProfileDef.BottomFlangeSlope.- AI_
BOTTOM_ WIDTH IfcAsymmetricIShapeProfileDef.BottomFlangeWidth.- AI_
DEPTH IfcAsymmetricIShapeProfileDef.OverallDepth.- AI_
TOP_ EDGE IfcAsymmetricIShapeProfileDef.TopFlangeEdgeRadius.- AI_
TOP_ FILLET IfcAsymmetricIShapeProfileDef.TopFlangeFilletRadius.- AI_
TOP_ FLANGE IfcAsymmetricIShapeProfileDef.TopFlangeThickness.- AI_
TOP_ SLOPE IfcAsymmetricIShapeProfileDef.TopFlangeSlope.- AI_
TOP_ WIDTH IfcAsymmetricIShapeProfileDef.TopFlangeWidth.- AI_WEB
IfcAsymmetricIShapeProfileDef.WebThickness.- CL_
CURVE IfcCenterLineProfileDef: Curve at 2, Thickness at 3. Thickness is the FULL width across the path, not a half-width.- CL_
THICKNESS - Full width across the centre line.
- COMPOSITE_
LABEL IfcCompositeProfileDef.Label, afterProfiles.- COMPOSITE_
PROFILES IfcCompositeProfileDef.Profiles.- C_DEPTH
IfcCShapeProfileDef.Depth.- C_
FILLET IfcCShapeProfileDef.InternalFilletRadius.- C_GIRTH
IfcCShapeProfileDef.Girth.- C_WALL
IfcCShapeProfileDef.WallThickness.- C_WIDTH
IfcCShapeProfileDef.Width.- DERIVED_
LABEL IfcDerivedProfileDef.Label, afterOperator; inherited unchanged byIfcMirroredProfileDef.- DERIVED_
OPERATOR IfcDerivedProfileDef.Operator.- DERIVED_
PARENT IfcDerivedProfileDef.ParentProfile.- E_SEMI1
IfcEllipseProfileDef.SemiAxis1.- E_SEMI2
IfcEllipseProfileDef.SemiAxis2.- I_DEPTH
IfcIShapeProfileDef.OverallDepth.- I_EDGE
IfcIShapeProfileDef.FlangeEdgeRadius.- I_
FILLET IfcIShapeProfileDef.FilletRadius.- I_
FLANGE IfcIShapeProfileDef.FlangeThickness.- I_SLOPE
IfcIShapeProfileDef.FlangeSlope.- I_WEB
IfcIShapeProfileDef.WebThickness.- I_WIDTH
IfcIShapeProfileDef.OverallWidth.- L_DEPTH
IfcLShapeProfileDef.Depth.- L_EDGE
IfcLShapeProfileDef.EdgeRadius.- L_
FILLET IfcLShapeProfileDef.FilletRadius.- L_SLOPE
IfcLShapeProfileDef.LegSlope.- L_
THICKNESS IfcLShapeProfileDef.Thickness.- L_WIDTH
IfcLShapeProfileDef.Width.- OC_
HORIZONTAL_ WIDTHS IfcOpenCrossProfileDef.HorizontalWidths.- OC_
OFFSET_ POINT IfcOpenCrossProfileDef.OffsetPoint.- OC_
SLOPES IfcOpenCrossProfileDef.Slopes, one per segment.- OC_TAGS
IfcOpenCrossProfileDef.Tags, one per point.- OC_
WIDTHS IfcOpenCrossProfileDef.Widths, one per segment.- TZ_
BOTTOM IfcTrapeziumProfileDef.BottomXDim.- TZ_
OFFSET IfcTrapeziumProfileDef.TopXOffset.- TZ_TOP
IfcTrapeziumProfileDef.TopXDim.- TZ_Y
IfcTrapeziumProfileDef.YDim.- T_DEPTH
IfcTShapeProfileDef.Depth.- T_
FILLET IfcTShapeProfileDef.FilletRadius.- T_
FLANGE IfcTShapeProfileDef.FlangeThickness.- T_
FLANGE_ EDGE IfcTShapeProfileDef.FlangeEdgeRadius.- T_
FLANGE_ SLOPE IfcTShapeProfileDef.FlangeSlope.- T_WEB
IfcTShapeProfileDef.WebThickness.- T_
WEB_ EDGE IfcTShapeProfileDef.WebEdgeRadius.- T_
WEB_ SLOPE IfcTShapeProfileDef.WebSlope.- T_WIDTH
IfcTShapeProfileDef.FlangeWidth.- U_DEPTH
IfcUShapeProfileDef.Depth.- U_EDGE
IfcUShapeProfileDef.EdgeRadius.- U_
FILLET IfcUShapeProfileDef.FilletRadius.- U_
FLANGE IfcUShapeProfileDef.FlangeThickness.- U_SLOPE
IfcUShapeProfileDef.FlangeSlope.- U_WEB
IfcUShapeProfileDef.WebThickness.- U_WIDTH
IfcUShapeProfileDef.FlangeWidth.- Z_DEPTH
IfcZShapeProfileDef.Depth.- Z_EDGE
IfcZShapeProfileDef.EdgeRadius.- Z_
FILLET IfcZShapeProfileDef.FilletRadius.- Z_
FLANGE IfcZShapeProfileDef.FlangeThickness.- Z_
FLANGE_ WIDTH IfcZShapeProfileDef.FlangeWidth.- Z_WEB
IfcZShapeProfileDef.WebThickness.